Wood Tech Capstone 20-21-https://zoom.us/j/91205097889?pwd=VWY4WVFwb1lXU2FXRFlFMkJkOThpQT09 Assignments

THIS SURVEY IS ANONYMOUS, PLEASE BE HONEST! I WANT TO LEARN HOW TO BETTER IMPROVE MY CLASSES.


Please submit feedback regarding the course you have just completed, including feedback on course structure, content, and instructor.

Go to link. Take the exam. Test code will be given in class. You have 90 minutes to finish the test.

Client wants a Gaming Desk made out of wood for her son but wants it unique. Her son loves anything Marvel, Disney, DC, Pixar, Star Wars. Create a detailed Sketchup Drawing with measurements and components for her.


ALSO Create a Bill of Materials and a quote that includes wood costs and labor estimate costs at $25 per hour.




Requirements:
- desk must be at least 2ft wide and 6 ft long
- must have at least 3 drawers
- Mahoghany 4/4 $7.00 BF
- 3/4" Mahoghany plywood $110 per sheet  (4'x8' sheet)
- 1/2" Baltic Birch plywood $35 per sheet  (5'x5' sheet)
- 1/4" Melamine MDF $30 per sheet 

 (4'x8' sheet)


Tips:
Research cabinet construction
Research drawer pulls and drawer slides

Sketchup requirements:


EVERYTHING MUST BUILT AND MADE INTO COMPONENTS

must have multiple components (I will use Xray to see how it will be built)
surfaces must be intersecting correctly as if it was built. (ie. walls must touch each other if they are supposed to be connected)
must have measurements and exploded view

Submit your photos for the scrap wood challenge. Try to get good photos because this is what I'm going to upload to Instragram for the final round.


Scrap Wood Challenge
Use any left over scraps from our 6 projects to build anything you want. You can use any other hardware that you supply. For example, if you want to make a wooden lamp, you must supply the lamp parts. Each period will have the top 3 selected to compete in the finals. The final contestants will be posted on the Mark Keppel Woodshop Instagram page and whoever gets the most likes in a week will win. The first place winner will win a $25 Amazon gift card paid out of my own pocket. Project will be due on May 14th.

Share your pergola project on Instagram and tag @markkeppelwoodshop for one point extra credit! Submit a screen shot here as proof.

submit your design for your scrap wood challenge


Scrap Wood Challenge
Use any left over scraps from our 6 projects to build anything you want. You can use any other hardware that you supply. For example, if you want to make a wooden lamp, you must supply the lamp parts. Each period will have the top 3 selected to compete in the finals. The final contestants will be posted on the Mark Keppel Woodshop Instagram page and whoever gets the most likes in a week will win. The first place winner will win a $25 Amazon gift card paid out of my own pocket. Project will be due on May 14th.

Cut dados and glue up last of the rafters. Take 6 views of your project with your totem.

Assemble the leg assemblies and beams together and take 6 view photos with totem.

Take a photo of the two post assemblies with you totem.

Take a photo of all your joists together so that I can see that they are the same size.20

Cut out legs and supports.  Take a photo of them together so that I can see that they are the same size.

Watch the video and fill out the survey. Turn in a screenshot of your career results.

Make a bill of materials with your pergola. The rough thickness of wood you are using is 3/4" material.

You will be using Poplar at $1.35 a board foot. Calculate the cost for the customer including 10 hours of labor at $25 and hour. Add all together for the quote

Create a 1/8th Scaled version of this Pergola. Please include an exploded view with all the dimensions of the parts.

Notes:

The ends have changed to 4" 45 degree angled cut.
The scaled wood thickness is 3/16" and width is 11/16"
The posts are 11/16" x 11/16"

Please name the file "pergola- yourname" and upload the .skp file

Please be detailed, "nothing" is not an acceptable answer.

Share your Dog House project on Instagram and tag @markkeppelwoodshop for one point extra credit! Submit a screen shot here as proof.

Assemble Dog House. Make pieces are even and flush to each other and remove all excessive glue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a square to show it is square.

Assemble Dog House Roof. Make pieces are even and flush to each other and remove all excessive glue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a square to show it is square.

Use this to review for the quiz

Use this to study for your quiz for Thurs and Friday

Assemble Dog House walls. Make pieces are even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a square to show it is square.

Assemble the first 3 Dog House Walls. Make pieces are even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a square to show it is square. You do not need to glue them together yet

Assemble Dog House Base. Make pieces are even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a square to show it is square.

Take the quiz and click turned in when done.

Create a plan and procedure for the dog house that divides the work into 5 days.

Make a bill of materials with your scaled chair. The rough thickness of wood you are using is 3/4" material.

You will be using Poplar at $1.35 a board foot. Calculate the cost for the customer including 10 hours of labor at $25 and hour. Add all together for the quote

Create a 1/8th Scaled version of this dog house. Please include an exploded view with all the dimensions of the parts.

Notes:
Arch is 1.5" deep.
There isn't a middle piece underneath.
Roof overhangs 6" on the rear in the full size drawing.

Please name the file "dog house- yourname" and upload the .skp file

Share your Adirondack chair project on Instagram and tag @markkeppelwoodshop for one point extra credit! Submit a screen shot here as proof.

Assemble assembly. Make pieces are even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a square to show it is square.

Assemble seat assembly. Make pieces are even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a square to show it is square.

Assemble backrest. Make wood is even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 2 views with your totem and submit. (front, back)

Please include a backview with the square to show it is square.

Assemble Left and Right leg assemblies. Make sure legs and apron are even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a sideview with the square to show it is square.

Create a plan and procedure for the Adirondack Chair.

Make a bill of materials with your scaled chair. The rough thickness of wood you are using is 3/4" material.

Create a 1/8th Scaled version of this chair. Please include an exploded view with all the dimensions of the parts.

Please name the file "adirondackchair - yourname" and upload the .skp file

Please answer yes or no if you picked up the wood. I need to confirm with my records of who pickup already.

Please put last name, then first name

Take the test until you reach 100 Percent. If you get it on your first try you earn extra credit. Please change your name to "first name last name 2" for second try and so on.

Drill press information and test

Go to link and register. Take the exam.

Share your Planter, Bench, and coffee table project on Instagram and tag @markkeppelwoodshop for one point extra credit! Submit a screen shot here as proof.

Take 6 views of planter with totem and submit here. 5 point deduction each error (glue residue, not flush, joint gapping, etc) 10 point deduction for any major mistake.

Create a Bill of materials for the 1/8th scale planter. Our rough thickness is Dimensional 3/4" poplar.

Create a Plan and Procedure for making the planter. You must include steps and measurements similar to how we have done the past two.

Create a 1/8th scale Sketchup of the sample planter. Please list all the dimensions and have an exploded view.

Share your Bench and coffee table project on Instagram and tag @markkeppelwoodshop for one point extra credit! Submit a screen shot here as proof.

Cut and glue Bench arms on. Make sure to remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a front with the square to show it is square.

take the quiz on kahoot. Use your real names or you will not receive credit.

Cut and glue seat stretcher assembly. Make sure slats are even and flush to the stretchers and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a front with the square to show it is square.

Cut and glue seat slat assembly. Make sure slats are even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a front with the square to show it is square.

Assemble RIGHT leg assembly. Make sure legs and apron are even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a sideview with the square to show it is square.

Assemble Left leg assembly. Make sure legs and apron are even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a sideview with the square to show it is square.

Please type in your Last name, First name as your player name.

Assemble seat assembly. Make sure seat and aprons are even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a top view with the square to show it is square.

Complete this plan and procedure

Make a bill of materials with your scaled bench. The rough thickness of wood you are using is 3/4" material.

Create a 1/8th Scaled version of this bench. Please include an exploded view with all the dimensions of the parts

angle of the back is about 97 degrees or 7 degrees off of 90 (square)

Cut and glue up your table top and mount it to your base. Make sure you have sanded everything perfectly before you assemble the top and base. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

NO FURTHER LATE SUBMISSIONS WILL BE ALLOWED FOR THE COFFEE TABLE AFTER THIS DATE BECAUSE WE ARE MOVING ON TO OUR NEXT PROJECT

Share your coffee table project on Instagram and tag @markkeppelwoodshop for one point extra credit! Submit a screen shot here as proof.

The other game expired too early. Here is a timed version to see who is the best!

Assemble leg assemblies and front and back aprons. Make sure legs are even and flush to each other and remove all excess clue, saw marks burn marks. After glue has dried then you glue in your middle support. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a front view and top with the square to show that the legs are square.

Assemble leg assembly on one side. Make sure legs are even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Please include a front view with the square to show that the legs are square. Here's a good example of good camera angles and views

click on the google form and answer the quiz.

Assemble leg assembly on one side. Make sure legs are even and flush to each other and remove all excess clue, saw marks burn marks. You will be graded on how well the cuts are and how well it is assembled. Take photos of 6 views with your totem and submit. (front, back, left, right, top, bottom)

Step 1: Cut three pieces that are 1 1/2" in length and glue them on their edges.
Step 2: Once the glue dries then create a unique drawing on it with your Initials and period on it. Please BE ARTISTIC!
(THAT IS IN INK AND DARK ENOUGH TO SEE)
Step 3: Take a photo and submit.

DO NOT LOSE THIS PIECE!

Below is a well cut and artistic totem.

Create a fence that is flush to miterbox and glue it in place. Make sure you only put glue on half of the width so glue doesn't squeeze out on the inside.

Take a photo with your miterbox AND your totem and submit.

Please read the question and answer.

Make a bill of materials with your scaled coffee table. The rough thickness of wood you are using is 3/4" material.

Calculate Board feet to the nearest hundredths.

Answer should look like "0.34 BF" or "5 BF"

Create a bill of materials using the diagram of the kids stool. Please include the material and total board feet needed to purchase and the estimated cost of the lumber.

Create a bill of materials for this side table

Create Coffee Table in 1/8" Scale of the example. IE. 8" in the drawing will be 1" in your drawing.

All pieces in the example are 1.5" thickness x 3.5" width

Any late work will be penalized at 30%. NO re-submission allowed.

3/4 students you will create the entire back frame of the chair. The lower slats are 3" wide. The risers are 1"x2"x28". The hold for the dowel is 3/4" and centered 2" from the bottom. All tenons are 1/4" from edges and 1/8" from the faces.

Create to specification and label measurements. Save file as Sketchup 2017 file and upload to Google classroom. Please put your name and project title in the save file. ie. Tony Stark - Simple Block.skp

3/4 students you must create the orginal block with hole and another block with a dowel to go down the shaft that combined does not exceed 3"x8"x10"

READ:
************* Hole must go through at 45 degrees centered at 2 inches from the end on top and bottom. ************************

Create to specification and label measurements. Save file as Sketchup 2017 file and upload to Google classroom. Please put your name and project title in the save file. ie. Tony Stark - Simple Block.skp

IF YOU CAN NOT UPLOAD THE .SKP FILE THEN YOU MUST UPLOAD THE FILE TO YOUR GOOGLE DRIVE AND POST THE LINK IN THE PRIVATE COMMENT IN THE ASSIGNEMENT SO I CAN GRADE. PHOTOS, SNIPPETS, SCREENSHOTS WILL NO LONGER BE ACCEPTED.

Create the OPPOSITE of the Frid Bench Cleat so it can nest together and not exceed 4" x 16 5/8" and provide dimensions

Create this simple block drawing to specification and label measurements. Capstone: Also create the mating piece to have a final dimension of 22" x 10" x 20"

Create this simple block drawing to specification and label measurements. Save file as Sketchup 2017 file and upload to Google classroom. Please put your name and project title in the save file. ie. Tony Stark - Simple Block.skp

Create this simple block drawing to specification and label measurements. Save file as Sketchup 2017 file and upload to Google classroom. Please put your name and project title in the save file. ie. Tony Stark - Simple Block.skp

Each is worth 2 points

All questions are worth 2 points each.

Go to https://www.rulergame.net/v2-standard-english-ruler-game.php

Step 1: Make increment settings a "Quarters" and score at least 1000 points then take a photo and upload
Step 2: Make increment settings a "Eighths" and score at least 1000 points then take a photo and upload
Step 3: Make increment settings a "Sixteenths" and score at least 1000 points then take a photo and upload

Step 1: Open this Slide and enter the labels for each text box.
Step 2: Turn in

Solve all the board feet problems on the google document. You MUST show your work! Remember to round to the nearest hundredths.

The answer should look like:
=0.17BF

Please read the syllabus and answer the question.

Please click on the link and answer the questions in detail.